a characteristic of a closed window which restricts air passage when the window is subjected to a differential pressure.
a frame with a sash that swings outward at the bottom.
an assessment of failure or permanent deformation of any part of a window that would cause operational malfunction(s) and/or endanger the user when subjected to test pressures.
most commonly found on sliders to facilitate the sliding movement. It consists of a brush that fits into a plastic track mounted on the sash or frame.
a frame with a sash that may be fixed or hinged at the side to open in or out.
the process through which an independent body ensures that standards have been met by means of conducting audits and testing.
a combination of two or more complete window assemblies of the same or different types, whose frames are mulled together.
an installation procedure in which the entire window assembly is removed right back to the rough opening and replaced with a completely new window.
seals that can be squeezed tightly together between the moving sash and frame.
the formation of moisture on the surface of the window.
heat loss in windows that occurs primarily through the edges of the glazing and through the sash and frames.
the ability of a material to conduct heat from the warm side to the cold side.
heat loss that occurs due to air movement between the glazings of a window.
minimum standards established by the Canadian Standards Association for air tightness, water tightness, wind resistance, condensation resistance, forced entry resistance and ease of operation. It also sets minimum requirements for all components and their materials from hardware, insect screens and weatherstripping to finishes and adhesives.
the temperature at which the air can hold no more humidity and it condenses to liquid.
both sash, top and bottom in a vertical slider, open and close.
a window containing two layers of glazing with a uniform space in between the layers, usually two panes of glass.
relating to windows, the ability of the glazing to allow radiation to pass through it.
a scale rating the comparative performance of windows based on three factors: 1) solar heat gains; 2) heat loss through frames, spacer and glass; and 3) air leakage heat losses.
a frame including a fixed light or lights. They do not open.
the associated head, jamb, sill and, where applicable, mullion and muntin that, when assembled, house the sash or fixed glazing.
an inert gas, usually argon or krypton, pumped into the sealed unit replacing the air.
the generic term for the transparent, or sometimes translucent, material in a window or a door. It is most often glass.
the horizontal member forming the top of the frame.
a basic law of nature that heat energy will move from warmer areas to colder areas.
relating to windows, glazing that allows radiated energy to pass easily through it.
a frame with a sash that swings inward at the top.
a frame containing two sash and one or both sash operate by sliding sideways in the frame. The sash meet when closed.
Insulating Glass Manufacturers Alliance
two or more panes of glass spaced apart and hermetically sealed in a factory.
another term for a pane of glass or glazing in a window.
relating to windows, glazing that restricts the passage of radiation through it.
a thin metallic layer, only several atoms thick, applied directly to the glazing surface the purpose of which is to reflect longwave energy back towards the source.
the stiles of a pair of sash that meet when the sash are installed and in a closed position.
a vertical or horizontal frame member that separates two or more sash, two or more fixed lights, or a combination of sash and fixed lights.
a vertical or horizontal sash member that separates two or more lights within a sash.
window that opens.
a change in shape or dimension which does not disappear when pressures are no longer applied.
a frame containing one or more sash, each of which swings horizontally to open in or out (Awning Window).
a measure of the resistance to heat flow through an object or material.
heat loss that occurs through the window glass
the amount of water vapour in the air as a percentage of the maximum amount the air could hold at the same temperature.
an installation procedure that involves working within the existing frame and replacing the sash and the glazed unit with a new window.
a unit assembly of stiles and rails for holding glass with or without dividing bars and muntins.
Siding and Window Dealers Association of Canada
wedges, usually about 2" wide used to position the window into the opening and ensure it is level, square and plumb.
the main cross or horizontal member forming the bottom of the frame.
only one sash, the bottom sash in a vertical slider, opens and closes.
a window containing just one layer of glazing, usually a single pane of glass.
the positive contribution to the heating of a building's interior made by the sun's energy passing through a window.
the strip of material that maintains uniform separation between the layers of glass in the glazing unit of the window.
minimum requirements, to which compliance is voluntary, for the components, materials and performance of windows.
an exterior-mounted window intended for use in conjunction with a separate interior prime window.
a flexible fin usually made of rubber or polypropylene which is fastened to either the movable sash or the stationary frame and sweeps against the opposing component to form a barrier.
an insulating material applied to a high conducting material to slow the transfer of heat.
a window containing three layers of glazing with two uniform spaces in between the layers.
a frame with a sash that can either tilt inward like a hopper window, or to swing inward like a casement window.
a frame containing two sash and one or both sash operate by sliding up and down in the frame. The sash meet when closed.
spacers made from insulating material such as foam, butyl, thermo-plastic, or thermally improved metals and therefore conduct significantly less heat energy than standard spacers.
the penetration of water that would continuously or repeatedly wet parts of a building or components not designed to be wetted.
material around operating lights designed to reduce air leakage or water penetration or both.
a national certification program that establishes minimum standards for windows, outlines best practises and trains installers on proper window installation procedures.